Custom tracksuits · made on our own floor

Custom Tracksuit Manufacturer

Jacket and pant cut from one fabric lot, so both halves match. A set counts as one piece against the 30-piece minimum.

  • From 30 sets
  • A set counts as one piece
  • Made on our own floor
  • Bulk in 3–4 weeks

Wearable Apparels makes matching custom tracksuits and sweatsuits in Sialkot, Pakistan — zip jacket, hoodie or quarter-zip over joggers or shorts — with both halves cut from a single fabric lot so the two colours actually match. A set counts as one piece against the 30-piece minimum, and nothing runs until you have held a sample — about 7 days from an agreed spec.

Just share your idea. We review it and propose next steps within 24 hours.

  • Top and bottom off one dye batchBoth halves are cut from the same lot, so the jacket and the pant do not arrive as two slightly different shades of the same colour.
  • Trims specified once for the whole setRib, zip and drawcord are written once across jacket and pant, so nothing drifts between the two halves.
  • Poly tricot, fleece or velourThe classic shiny tricot hand, 300–400 GSM brushed fleece for warmth, or velour for a retro pile — one set, your choice of cloth.
  • Contrast tipping carried across both halvesRib stripes on collar, cuff and hem specified as one job, so the set reads as a set.

From 30 pieces per design, at least six per colour — one full size run — so up to five colours fit in a 30-piece order. You start with a single-piece sample and approve it before you commit. A set counts as one piece, never two.

Silhouettes

Zip jacket, hoodie, quarter-zip, shorts and tricot sets

Pick the pairing — the matched-set section below is where the one-fabric-lot story lives.

Zip Jacket + Jogger

The classic full-zip set, top and bottom off one lot.

The spec

Top
Full-zip jacket
Bottom
Tapered, straight or shorts
Counts as
One piece, never two
Start your tracksuit project

Hoodie + Jogger

A pullover top with a matched bottom.

The spec

Top
Hooded pullover
Bottom
Cut to match the top
Start your tracksuit project

Quarter-zip Set

A mock-neck top over a tapered bottom.

The spec

Top
Quarter-zip, mock neck
Bottom
Tapered
Start your tracksuit project

Shorts Set

A summer-weight top with matched shorts.

The spec

Bottom
Shorts, cut to match
Weight
Summer
Start your tracksuit project

Poly Tricot Set

The retro shiny tracksuit hand.

The spec

Fabric
Poly tricot
Hand
Classic shiny tracksuit
Start your tracksuit project

The hard part of a set is the jacket and the pant reading as one garment — same fabric lot, same shade, same hand. Send us a set you like and we match both halves to it.

The matched set

Top and bottom from one fabric lot — and a set counts as one piece

Cut together
Top and bottom cut from the same fabric lot and dye batch.
Counts as one piece
A set counts as one piece against the 30-piece minimum, never two.
Matched trims
Rib, zip and drawcord specified once across the whole set.
Jacket options
Full-zip, quarter-zip, hooded or collared top.
Bottom options
Tapered, straight or shorts — cut to match the top.
Reorder match
Your spec stays on file so the next drop matches this one.

Because both pieces come off one lot, the set matches in colour and hand — and the sample proves it before any bulk run.

Fabric

Poly tricot, brushed fleece, French terry and velour

Poly tricot
The classic shiny tracksuit hand.
Brushed fleece
300–400 GSM for a heavier, warmer set.
French terry
Mid-weight loopback that layers year-round.
Performance blend
Moisture-wicking four-way stretch for training sets.
Velour
Soft, retro pile for a statement set.

Not sure which hand? Tell us the look and the sample settles it — top and bottom, off one lot.

Decoration

Embroidery, screen print, DTF, sublimation and rib tipping

Embroidery
Flat or 3D puff — chest logos and leg marks.
Screen printing
Plastisol or water-based across top and bottom.
DTF
Full-color transfers for detailed art on smaller runs.
Sublimation
All-over prints on poly sets — the dye becomes the fabric.
Puff printing
Raised ink for tactile logos and type.
Rib tipping
Contrast stripes on collar, cuff and hem across the set.

Send your artwork first — we match the technique to the fabric so both pieces hold run after run, wash after wash.

How long does a custom order take, start to finish?

Send your idea, tech pack or a garment you own — a real person replies within 24 hours. Approve a single-piece sample in about 7 days; bulk runs 3–4 weeks after approval; DDP delivery lands in 4–7 days.

What actually sets your price?

Fabric & weight, construction, decoration, quantity and trims & private label set your price. Every quote is DDP — freight, duty and VAT itemised — and a real spec gets a reply within 24 hours.

How do you know we're the factory and not a middleman?

You deal directly with the people who cut and sew your order — one floor in Sialkot, no agent between you and it. Before you commit, see the factory on a live video call: your camera, your questions, no script. Payment is staged 40/30/30 (50/50 on runs under 30 pieces) against proof at every stage, with a fix-or-hold remedy if something's off.

Frequently asked questions

These are the tracksuit-specific ones. Ordering, payment, shipping and proof are answered on the general FAQ — or reach out to our team.

One. A set counts as a single piece against the 30-piece minimum, never two.

Start your project

See us before you commit.

Book a live tour, or send your idea and we'll propose next steps within 24 hours. A single-piece sample is how most orders start — approve the real garment before bulk.

Need help with your tracksuit order? info@wearableapparels.comWhatsApp